Requesting a Custom Steel Frame Quote from Techno Kol Uzi

t489-48

To get a custom steel frame quote, send us photos and a short description of the project, then we arrange an on-site measurement and prepare a drawing and written specification. Once you approve the specification, we manufacture the frame to measure in our Tel Aviv factory and deliver it for installation.

What to Prepare Before You Contact Us

A clear inquiry makes the quote faster and more accurate. Start by gathering a few photos of the area where the steel frame will go, from several angles, including any existing structure it must connect to.

Photos of the location and surrounding walls or beams
A rough sketch with approximate dimensions
The intended use, such as a support frame, opening, canopy or structural element
The finish you prefer, for example galvanized or powder coated

Even partial information is useful. We will confirm everything during the site visit.

On-Site Measurement

Dimensions taken from photos are never enough for steel work. After receiving your inquiry, our team visits the site to measure the opening or space precisely, check levels and verticality, and see how the frame will be fixed.

During the visit we also look at access routes for delivery and lifting, since these affect how the frame is divided into sections. Measuring on site prevents errors that would otherwise only show up at installation.

Drawing and Written Specification

After measurement we prepare a drawing showing the frame geometry, profile sizes, connection points and fixing method. The written specification lists the materials, the finish and the installation steps in plain language.

Please review both documents carefully. Ask about anything that is unclear, especially fixing points and clearances. Structural load and standard requirements are confirmed with our engineer, and we will tell you when an exact value needs that check.

Client Approval

Production begins only after you approve the drawing and specification in writing. This step protects both sides: changes are cheap at the drawing stage and expensive once steel has been cut and welded.

Check dimensions against the actual site
Confirm the finish and colour
Confirm who is responsible for fixing into the existing structure

Factory Production and Finishing

Once approved, the frame is cut, welded and assembled in our factory at 37 Rival Street, Tel Aviv, where we have worked since 1945. Working in the workshop lets us control tolerances and quality before anything reaches the site.

Finishing follows production. Depending on your choice, the frame is hot-dip galvanized for corrosion protection or powder coated for a durable colour finish. Both steps are done before delivery.

Delivery and Installation

The frame is delivered in sections sized for the access route and installed on site. Installation is coordinated with your contractor or site manager so that the frame is fixed, aligned and checked against the drawing.

Keep the approved drawing on site during installation. If anything on site differs from the measurements, tell us before fixing so we can adjust the design together.

Frequently asked questions

What information do I need to send for a custom steel frame quote?

Send photos of the location from several angles, a rough sketch with approximate dimensions and a short description of how the frame will be used. This lets us plan the site visit properly.

Is a site visit required before the quote?

Yes, for steel frames we measure on site before preparing the final drawing and specification. Photos alone cannot reliably show exact dimensions, levels or fixing conditions.

Can I change the design after approving the drawing?

Changes are possible before production starts, and they are easiest at the drawing stage. After cutting and welding begins, changes become more costly, so please review everything carefully before approval.

How do I choose between galvanized and powder-coated finishes?

Galvanizing offers strong corrosion protection for exposed outdoor steel, while powder coating gives a durable finish in a chosen colour. We will advise you based on the location and how the frame will be used.

Common mistakes to avoid

Sending a request without photos or measurements and expecting an accurate drawing from them alone. Approving the specification without checking fixing points and dimensions against the actual site.

Our recommendation

Walk the site with a tape measure and note the fixing surfaces before you call, and keep the approved drawing on site during installation so any on-site discrepancy is caught early.

Summary

A custom steel frame quote starts with photos and a sketch, continues with an on-site measurement and a written drawing, and ends with factory production and professional installation.

השאירו פרטים ונחזור אליכם