Sliding Window Security Bar Kits for Aluminum Tracks

t260-10

A sliding window security bar kit for aluminum frames with tracks is a set of bars fixed inside or outside the frame that stops the sash from being forced open, while still allowing the window to slide for ventilation. The right kit depends on the track profile, the frame depth and whether the bars need to be removable for emergency exit.

Why sliding aluminum windows need a different approach

Sliding aluminum windows are popular because they are light and easy to open, but the track and the sash are also the weak point. Someone who wants to get in usually pushes the sash sideways or lifts it out of the track, so a bar that only covers the glass does little good.

A proper kit has to work with the track itself. The bars must be anchored to the frame or the wall at points that hold under force, and they must stop the sash from travelling past a safe limit. Because every track profile is slightly different, a kit that fits one window may not fit another, even when the sizes look similar.

Types of bars for tracked sliding windows

There are a few common approaches, and each suits different window layouts:

Fixed bars that cross the opening and are fastened to the frame on both sides.
Sliding bars that move with the sash and lock in place when closed.
Removable bars with a quick-release pin for rooms that need a fast exit.
Bars with a simple stop that limits how far the sash can open.

Fixed bars give the highest resistance. Removable bars are a good choice where fire safety matters, such as bedrooms.

Checking the frame before ordering

Before ordering, measure the opening from the inside of the frame, not from the outside edge, and note the depth of the track and the width of the frame profile. Take photos of the track from the side and from above, showing where the sash rests and where the fixing points would sit.

Check that the frame is solid enough to take the fixings. Thin profiles or old, weathered frames may need reinforcement or fixings into the wall. An on-site measurement by our team catches these details before any metal is cut.

Fixing and finishing options

Bars are usually made from iron or aluminum. Iron offers greater strength for the same profile, while aluminum is lighter and does not rust. Both can be finished with hot-dip galvanizing for corrosion protection and then powder coated in a colour that matches your window frame.

Fixings should go into the frame or the structural wall, never only into the glass or thin plastic trim. Good fixings matter as much as the bar itself.

Keeping the window working and safe

A security kit should not stop the window from being used for ventilation. Make sure the bars allow the sash to open to the intended ventilation position and that the locking point is easy to reach from inside. If the window is on an upper floor, the bar should not block a safe escape route in an emergency.

Clean the track regularly so the sash slides smoothly. A sticking sash may push users to force the window, which can damage both the bar and the frame.

From inquiry to installation

The process is simple. Send us photos of the window and the track, and tell us which room it is and how it opens. We will arrange an on-site measurement, then send a drawing and a written specification for your approval. After you approve it, the bars are made in our Tel Aviv factory, finished, and installed at your home.

Ask for the drawing before production so you can confirm the fixing points and the opening limit together.

Frequently asked questions

Can a security bar be fitted to an existing aluminum sliding window?

In most cases yes, provided the frame and wall can take the fixings. A site visit confirms the track profile and fixing points before production.

Will the bar stop the window from opening for ventilation?

A correctly designed kit still allows the sash to open to a set ventilation position. The exact limit is agreed in the drawing before manufacture.

Are removable bars safe in a bedroom?

Removable bars with a quick-release pin are often chosen for bedrooms so the window can be used as an emergency exit. Confirm the release method with your installer.

Which material is better, iron or aluminum?

Iron is stronger for the same profile, while aluminum is lighter and does not rust. Both can be galvanized and powder coated for long life.

Common mistakes to avoid

The most common mistake is measuring only the glass and ignoring the track depth, which leads to bars that do not sit properly. Fixing into thin trim instead of the frame or wall is another frequent error that weakens the whole kit.

Our recommendation

Send photos of the track from the side and the top before choosing a kit, and ask for a drawing that shows the fixing points and the opening limit. Have the frame checked for solidity if it is older or thin-profiled.

Summary

A sliding window security bar kit for aluminum tracks must match the track profile, anchor into a solid frame or wall, and still allow safe ventilation.

השאירו פרטים ונחזור אליכם