Steel Frame Partitions for Modern Office Floors

t480-21

A steel frame partition office system uses custom-fabricated steel profiles as the structure for walls, glazed panels and doors, so the layout can be planned to your floor and changed later. Because the frames are made to measure in our factory, they fit irregular columns, ceiling heights and floor plans common in Tel Aviv office buildings.

Why Steel Frames Suit Office Reconfiguration

Office managers rarely keep the same layout for long. Teams grow, departments merge and meeting rooms need to change. A steel frame partition office system gives you a rigid structure that holds glass, panels or solid infill while still allowing sections to be modified rather than demolished.

Steel profiles are slim compared with masonry, which keeps more floor area usable and lets daylight travel deeper into the space.

Planning the Layout Before Fabrication

A good partition starts with a clear plan. Before any steel is cut, we recommend listing the rooms you need, the traffic routes, and which walls must stay visually open. Note where the ceiling is fixed and where services such as air ducts and sprinkler lines run.

We measure on site, check the floor for level, and confirm how the frame will anchor to the slab and ceiling structure.

Glass, Solid Panels or a Mix

Most offices combine materials. A typical approach uses glazed sections for meeting rooms and reception, and solid panels for quiet offices or storage.

Glazed frames keep the space bright and open.
Solid infill improves acoustic privacy.
Steel-look profile doors can match a modern interior scheme.

Fabrication and Finishing in Our Workshop

Every frame is cut, welded and assembled at our factory on Rival Street in Tel Aviv. This lets us control tolerances and prepare the surfaces properly before delivery.

Finishing options include hot-dip galvanizing for corrosion protection and powder coating for a consistent colour. We confirm the finish with you before production so the installed result matches your design.

Installation and Working Around Tenants

Installation is planned around the building's working hours and access rules. Frames are often delivered in sections sized to fit the lift and stairwell, which reduces disruption to neighbouring businesses.

Fixings are chosen for the substrate, whether concrete slab, raised floor or existing wall, and our installers check alignment at each stage.

Safety, Standards and Next Steps

Partitions in offices should meet relevant building and fire requirements, and any guarding or glazing must comply with the applicable standards. For railings and similar elements, Israeli standard SI 1142 is a useful reference, but exact dimensional values should always be checked with your engineer.

Start by sending photos and rough dimensions, and we will arrange an on-site measurement and a written specification for your approval.

Frequently asked questions

Can a steel frame partition be moved later?

Yes, in most cases glazed or panel sections can be removed and refitted in a new position. The frame design should be planned with reconfiguration in mind from the start.

Do you measure on site before making the frames?

Yes. We carry out an on-site measurement, check floor and ceiling levels, and then prepare a drawing and written specification for your approval before production.

Which finishes are available for office steel frames?

Options include hot-dip galvanizing and powder coating in a range of colours. We confirm the finish with you before manufacturing begins.

Can the partitions be designed around existing ceiling services?

Yes. We note the position of ducts, lighting and sprinkler lines during the site visit so the frame layout avoids clashes.

Common mistakes to avoid

Ordering frames before the layout is finalised, or skipping a site check of floor levels and ceiling services, often leads to costly adjustments. Confirm the plan and measurements first.

Our recommendation

Plan your partitions around how the space will be used in two or three years, not just today, and choose a frame design that allows panels to be moved or replaced without rebuilding the structure.

Summary

A steel frame partition office system offers a durable, custom and adaptable way to reconfigure modern workspaces built to your measurements.

השאירו פרטים ונחזור אליכם