Choose Your Balcony Railing Style and Start Ordering

t320-43

Choose your balcony railing style by looking at the building, the view you want to keep, and how much privacy and safety you need. Then send photos and a few measurements to our factory at 37 Rival Street, Tel Aviv, so we can prepare a drawing and written specification for your approval before production starts.

Start with style and function

Before you order, decide what the railing needs to do. A railing can be open and light to keep the view, solid to give privacy, or a mix of both. Think about the look of your building too. A classic iron pattern suits older facades, while clean lines or glass panels fit modern buildings.

Open bars for views and airflow
Solid panels or sheet for privacy
Glass infill for a clean, modern look

Share photos of your balcony and the building facade. This helps us suggest options that match what is already there.

Take accurate measurements

Good measurements prevent delays. Measure the length of each balcony edge, the height from the floor to the top of the railing you want, and the position of any walls, posts or columns. Note whether the floor is tiled, concrete or has a threshold, since this affects how the base is fixed.

If you are unsure, we can arrange an on-site measurement. Our team checks the details on the spot so the drawing matches your balcony exactly.

Receive the drawing and approve the specification

After the measurement, we prepare a drawing and a written specification. These show the railing design, dimensions, materials, fixing method and finish. Read them carefully and ask questions about anything unclear.

Once you approve the drawing in writing, we move to production. Changing the design at this stage is much easier than after work has started, so take your time with this step.

Production in our Tel Aviv factory

Techno Kol Uzi has produced metalwork in Tel Aviv since 1945, and the work is still run by the third generation of the family. Each railing is cut, welded and assembled in our factory to your measurements. Iron and steel parts are finished with hot-dip galvanizing or powder coating, which protects them against the coastal air and weather.

Working in the factory lets us check every piece before it leaves for site.

Installation and safety checks

Our team installs the railing and fixes it securely to the balcony structure. Railings must be strong enough to resist the loads they are designed for, and the Israeli railing standard SI 1142 covers this area. Exact values for height, spacing and fixing are checked with your engineer on each project, so we do not rely on general figures.

After installation we check alignment, fixings and finish together with you.

Place your order

When you are ready, send us your choice of style, photos and measurements. Our team will reply with the next steps and confirm the drawing and specification. You can contact us by phone or WhatsApp, or visit the factory at 37 Rival Street, Tel Aviv.

Send photos and rough measurements
Schedule an on-site visit if needed
Approve the drawing and specification
Production, finishing and installation

Frequently asked questions

Do I need exact measurements before I contact you?

Rough measurements are enough to start. We will confirm the exact sizes during the on-site measurement before anything is produced.

Which railing style is best for a windy balcony?

Solid or partly solid designs reduce wind passing through, but the final choice depends on the balcony and the building. We recommend discussing this with our team.

Will the railing be protected against rust?

Iron and steel parts are finished with hot-dip galvanizing or powder coating, which give strong protection against weather and coastal air.

Can I change the design after approving the drawing?

Changes are possible before production begins, but they are much easier to make at the drawing stage than after work has started.

Common mistakes to avoid

Ordering before confirming measurements and approving the drawing in writing often leads to fitting problems. Always check that the height, spacing and fixing details match your balcony before production starts.

Our recommendation

Send photos of the balcony and facade along with rough measurements at the beginning, and ask for the drawing to be reviewed with the on-site measurements. This keeps the style you want and avoids surprises at installation.

Summary

Choose a railing style that suits your building and needs, confirm accurate measurements, approve the drawing, and let our Tel Aviv factory produce and install it.

השאירו פרטים ונחזור אליכם