Custom Iron Handrails Made to Your Staircase Measurements

Why Custom Iron Handrails Fit Better Than Standard Ones

Staircases rarely follow standard dimensions. Wall thickness, step nosing, landing width, and the angle of the turns all affect how a handrail should sit. Off-the-shelf rails often leave gaps at the wall or fail to line up at the landings, which looks unfinished and can be uncomfortable to grip.

Custom iron handrails are made from your own measurements, so each section meets the next precisely. The result is a rail that follows the line of the stairs and feels solid under the hand.

How the Measuring Process Works

Before anything is cut, we visit the site and measure the staircase directly. We record the rise and run of each step, the height of the rail above the nosing, the wall-to-rail distance, and how the rail turns at landings and corners.

• Measurements taken at the actual site, not from plans alone
• Notes on wall type, thickness, and any obstacles
• Photos to confirm the details

These measurements form the basis of the drawing.

From Drawing to Approval

Once the measurements are in, we prepare a drawing and a written specification covering the profile, the bracket spacing, the finish, and how each section connects. You review the drawing and confirm it before production begins.

This step matters most in new builds, where a small error in wall height or landing position can affect the whole rail. Checking the drawing together avoids changes after the iron is already cut and welded.

Production and Finishing in Our Factory

Every handrail is cut, shaped, and welded in our workshop at 37 Rival Street, Tel Aviv, where we have worked in iron and metal since 1945. Curved sections and transitions at landings are formed to match the drawing so the rail flows continuously.

For finishing, we use hot-dip galvanizing for corrosion protection and powder coating for the final color. Both help the rail hold up to the weather and daily use.

Installation and What to Check

On installation day, the brackets are fixed to the wall or stair structure first, and the rail sections are then set and aligned. We check that the rail height and grip profile are comfortable and that the connections are secure.

If you are building a new staircase, coordinate with your contractor so that wall reinforcement or anchor points are ready when the rail arrives. Safety requirements for railings are covered by the Israeli railing standard SI 1142; exact values for height and load should be confirmed with your engineer.

Planning a Handrail in a New Build

The best time to plan custom iron handrails is during the construction stage, before the final wall finishes go on. Early planning allows the bracket positions to be set in the structure and avoids patching later.

• Share the staircase drawings with us early
• Confirm the finish and color before production
• Schedule the measuring visit once the stair structure is complete

Frequently asked questions

Can you make handrails for any staircase shape?

Yes. We produce straight runs, curved stairs, and handrails with landings or turns, as long as we can measure the staircase on site. The drawing shows how each section connects before production.

Do I need to be present for the measuring visit?

It helps to be there or to have someone who knows the project available, so questions about the design can be answered on the spot. We will confirm the visit time with you in advance.

How do you protect iron handrails from rust?

We hot-dip galvanize the iron for corrosion protection and finish it with powder coating. This combination suits both indoor stairs and exterior staircases.

Can the handrail be installed on an existing staircase?

Yes, custom handrails can be made for existing stairs as well. The measuring visit captures the actual dimensions, including any irregularities in the existing walls.

Common mistakes to avoid

Ordering a handrail before the staircase is finished, or relying on approximate measurements, often leads to rails that do not line up at landings or wall connections. Confirm the final dimensions before production begins.

Our recommendation

Take the handrail into account when you design the staircase, and fix the bracket positions in the structure early. Sharing your staircase drawings with the metalworker at the start prevents most fitting problems.

Summary

Custom iron handrails made to your staircase measurements fit cleanly, feel comfortable, and last when finished properly. Measure on site, approve a written drawing, then produce and install.

Related guides

• Replacing an Old Wooden Handrail With Durable Steel
• Handrail Specifications for Commercial Buildings Process
• Upgrading a Balcony Railing to Meet Current Safety Standards
• Commercial Handrail Project Planning Checklist
• Stainless Steel Handrails for Wet Areas and Pool Surrounds
• Request Handrail Installation for Your Building Project
• All models in this category