Do You Offer Stainless Steel Cladding for Building Facades?

t464-35

Yes. Techno Kol Uzi Ltd. manufactures stainless steel works to measure, including custom metalwork for facade elements, and we work from architectural drawings and written specifications. Architects and contractors can send us their facade concept, and we will confirm what we can produce and how the project would proceed.

What We Can Produce for Facades

Our factory at 37 Rival Street in Tel Aviv has produced iron, aluminum, glass and stainless steel works since 1945. For facade projects we manufacture custom stainless steel elements, including panels, brackets, frames, trims and supporting metalwork, cut and formed to the dimensions of your design.

Because every facade is different, we do not work from a fixed catalog. Each element is made to your drawings so it fits the building as designed.

How a Facade Project Starts

The process begins with your inquiry, ideally with photos, plans or elevations of the building. If the project needs it, we visit the site to measure the actual conditions, since existing structures are rarely perfectly square.

From there we prepare a drawing and a written specification for your approval. Nothing goes into production until you have confirmed the details.

Materials and Finishes

Stainless steel suits facades because it resists weather and needs relatively little maintenance. The grade and surface finish should match the environment, especially near the coast, where salt air places greater demands on the material.

We discuss grade, surface finish and fixing method during the specification stage, so the choice suits both the look you want and the conditions the facade will face.

Coordination With Your Design Team

Facade work touches structure, waterproofing, glazing and finishes, so coordination matters. We work with architects, engineers and contractors to confirm dimensions, tolerances and connection points before fabrication starts.

Share the drawings and structural details early
Confirm fixing points and substrate type
Agree on tolerances and interfaces with other trades

Production and Finishing

Once approved, the elements are cut, formed, welded and finished in our factory, which lets us control quality before anything reaches the site. Where the design calls for it, we apply the required surface finish to the stainless steel.

Working in the workshop also means fewer surprises on site and a cleaner installation schedule for the contractor.

Installation and Structural Checks

Installation is coordinated with the contractor and follows the approved drawings. For railings and other load-bearing elements, Israeli standard SI 1142 is relevant, and the exact values for your project should be checked with the structural engineer rather than taken from general guidance.

If you are planning a facade and want to confirm whether stainless steel works fits your design, contact us with your drawings and we will tell you what is possible.

Frequently asked questions

Can you work from our architectural drawings?

Yes. We produce to your drawings and written specification, and we confirm the details with you before any production begins.

Do you measure on site?

Yes, when the project requires it. On-site measurement helps us account for the real conditions of the building rather than relying only on plans.

Which stainless steel grade should we use for a facade?

The right grade depends on the environment and the design, especially distance from the sea. We recommend discussing this with us and your engineer during the specification stage.

Do you handle installation as well?

Installation is coordinated with your contractor and follows the approved drawings, so the work fits into the wider building schedule.

Common mistakes to avoid

Choosing a stainless steel grade and finish without considering the environment, or ordering elements before dimensions are verified on site, often leads to rework. Confirm both early in the project.

Our recommendation

Send your drawings and the facade's location to the fabricator at the start of design, not after the structure is built. Early coordination on tolerances, fixing points and finish saves time and cost for everyone.

Summary

Techno Kol Uzi manufactures custom stainless steel works for building facades, produced from your drawings and installed in coordination with your team.

השאירו פרטים ונחזור אליכם