Electric Gate with Tenant Access Codes for Rental Property

t286-22

An electric parking gate with tenant access codes lets each renter open the gate with their own personal code, so you can track and change access without handing out shared keys. Sliding and swing gates can both be fitted with keypads or code systems suited to a multi-unit building. Your gate is made to measure and installed according to the site conditions and the access system you choose.

Why Landlords Choose Individual Access Codes

When several families share one parking area or courtyard, a single shared code quickly becomes a problem. Keys get copied, former tenants keep access, and changing one code means informing everyone at once. Individual access codes solve these issues by giving each renter their own code that you can add or remove on its own.

For a landlord managing several units, this also makes daily management simpler. You know who has access, you can set codes for a defined period, and a lost or stolen code affects only one tenant instead of the entire building.

Sliding or Swing Gate: Which Suits Your Building

The right gate type depends on the space available. A sliding gate runs along a track and is a good choice when there is no room to swing outward or inward, which is common in narrow driveways. A swing gate opens on hinges and works well when the driveway is wide enough and you want a more traditional look.

Sliding gate: saves space, suits sloped or tight entrances
Swing gate: classic appearance, needs clear swing space

In both cases the gate is designed around the actual measurements of your entrance, so the final choice is made after an on-site visit.

Choosing the Access System for Tenants

Tenant access can be handled in several ways, including keypads with individual PIN codes, proximity cards, and remote controls. Keypads are often the most practical for rental properties because codes can be issued and changed without any physical item changing hands. Cards or remotes can work well for smaller buildings where each unit has a clear owner.

Discuss with your installer how many codes you expect to need, whether you want a log of who opened the gate, and how codes will be assigned when a tenant moves in or out. Planning this at the start avoids rework later.

Safety and Standards for Automated Gates

An automated gate moves heavy material, so safety matters for tenants, children and visitors. The gate should include sensors that stop or reverse movement if something is in the path, and it should be installed with proper clearance and stopping points. Israeli railing and safety requirements, including the general guidance in SI 1142, should be considered during design.

Exact technical values depend on the gate size, weight and site, so they should be confirmed with the engineer during the planning stage rather than assumed.

How the Process Works at Techno Kol Uzi

The process starts with your inquiry, where you can send photos of the entrance and describe the number of units. Next, we visit the site to measure the opening and check the surface, slope and power supply. Based on this, we prepare a drawing and a written specification for your approval.

Inquiry with photos and unit count
On-site measurement
Drawing and specification for approval
Production in our Tel Aviv factory
Finishing with hot-dip galvanizing and powder coating
Installation and handover

Maintenance and Managing Codes Over Time

A gate used daily by many tenants needs periodic checks. Hinges or track rollers, the drive motor, sensors and the keypad should be inspected regularly, and the finish should be kept clean to protect the galvanized and powder-coated surfaces. Ask for a simple maintenance routine when the gate is handed over.

Keep a written record of issued codes, updating it whenever a tenant moves in or out. This habit makes it easy to remove access promptly and keeps your building secure.

Frequently asked questions

Can I give each tenant a different access code?

Yes, individual codes are one of the main reasons landlords choose an electric gate with a keypad or code system. Each code can be added, changed or removed without affecting other tenants.

Is a sliding gate or a swing gate better for a rental building?

It depends on the space at the entrance. Sliding gates suit tight or sloped driveways, while swing gates suit wider entrances where the gate can open freely.

Do I need to measure the entrance before ordering?

Yes, we visit the site to measure the opening and check the surface, slope and power supply before preparing the drawing. This ensures the gate fits correctly the first time.

What happens if the gate is blocked while closing?

A properly designed automated gate includes safety sensors that stop or reverse the movement when an obstacle is detected. Your installer should confirm these features are included.

Common mistakes to avoid

Landlords often choose a gate type without checking the space at the entrance, or they share one code among all tenants. Both lead to avoidable problems later.

Our recommendation

Plan the number of access codes and the gate type together before ordering, and confirm the safety sensors and maintenance routine in writing. This keeps the installation practical for both you and your tenants.

Summary

An electric gate with individual tenant access codes gives landlords secure, easy control over parking and courtyard access, with a design matched to the building.

השאירו פרטים ונחזור אליכם