Gate Intercom Visitor Screening for Electric Gates

t286-21

A gate intercom with a camera lets you see and speak with a visitor before you open an electric gate, so you can screen who enters. The system works with both sliding and swing gate motors and can be set up for residents, delivery drivers and guests.

Why Screen Visitors Before the Gate Opens

An electric gate is only as useful as the control you have over it. Without a way to see who is outside, residents often open the gate for anyone who rings, or leave it closed and miss important visitors. A gate intercom with a video camera changes this. You check the person, decide whether to talk, and open remotely only when you are satisfied.

This matters most for private homes, shared courtyards and building entrances in busy parts of the city, where strangers may follow a car through an open gate.

Sliding Gates and Swing Gates: What Changes

Both gate types can be paired with an intercom, but the installation details differ. A sliding gate runs on a track and needs clear space for the motor housing and the full travel of the leaf. A swing gate needs room to open without hitting a wall, a car or a pillar.

Sliding gate: check the track, rollers and the path of the leaf.
Swing gate: check the arc, hinge side and the position of the motor arms.

In both cases the intercom panel should sit where a driver or pedestrian can reach it without leaning into traffic.

Choosing the Right Intercom Setup

Think about how you will use the system day to day. A video panel shows a live image of the person at the gate, while an audio-only panel only lets you hear them. For screening, video is usually the better choice, especially at night.

Consider where the panel mounts, whether you need one or several units, and how the open command reaches the motor. A wired connection is generally more reliable for gates in exposed outdoor locations, while wireless options can suit simpler installations.

Placement and Weather Protection

Position the panel and camera so the visitor is well lit and their face is visible, avoiding direct sun or headlights shining into the lens. Mount it on a solid surface at a comfortable height, and keep the wiring protected from water and sun.

Outdoor components should be weather-resistant. Our factory works with iron and stainless steel, so a steel mounting plate or enclosure can give the panel a sturdy, clean base that suits the gate design.

Safety and Gate Sensors

Screening visitors is only part of the picture. The gate also needs safety features so it does not close on a person or a vehicle. Photocells and obstacle detection are standard safeguards that should be checked during installation.

Exact safety clearances and requirements should be confirmed by the installer and engineer for your specific gate. The Israeli railing standard SI 1142 is a useful general reference for guarding, while the final figures are checked on site.

From Measurement to a Working Gate

A reliable setup starts with a visit. We measure the opening, check the ground, the wall or pillars and the access route, then draw and specify the gate and the intercom position in writing. You approve the plan before anything is produced.

The gate is manufactured in our factory, finished with hot-dip galvanizing or powder coating, and installed on site with the intercom and motor wired and tested together.

Frequently asked questions

Can I add an intercom to an existing electric gate?

In many cases yes, provided the gate motor supports an external open command and there is a route for the wiring. A site check is needed to confirm compatibility.

Is a video intercom better than audio only?

For screening, video is usually better because you can see the visitor's face and identify them before opening. Audio-only is simpler but gives less information.

Can I open the gate from my phone?

Some systems allow remote opening through an app, depending on the equipment chosen. Remote access should be discussed during the planning stage.

Do sliding and swing gates need different intercom placement?

The panel position depends more on where drivers and pedestrians stand than on gate type. The gate design affects the motor and clearance, so the layout is planned for each gate separately.

Common mistakes to avoid

Placing the panel where the camera faces the sun or headlights, which makes visitors hard to identify. Skipping the safety sensors to save effort, which can lead to the gate closing on people or vehicles.

Our recommendation

Plan the intercom position before fixing the gate, and test the visitor view at night as well as in daylight. Confirm the safety features with the installer so screening and safe operation work together.

Summary

A gate intercom with video lets you screen visitors before opening your electric sliding or swing gate, improving both security and convenience when properly planned and installed.

השאירו פרטים ונחזור אליכם