Ornamental Iron Panels for Entrance Doors | Techno Kol Uzi

t503-21

Ornamental iron panels for entrance doors are decorative metal infills made to measure for a specific door leaf, combining visual character with security and ventilation. They are designed from your drawings or a site measurement, cut and welded in our factory, then finished for outdoor exposure. Architects and designers can request custom patterns that match the building's façade.

What ornamental iron panels add to an entrance

An entrance door is the first thing visitors see, and an ornamental iron panel can turn a plain door into a clear design statement. The panel sets the tone for the whole façade, whether the style is classic, contemporary or minimal.

Beyond looks, a well-designed panel lets light and air pass through, keeps the door secure, and adds a layer of privacy without blocking the view entirely. It works especially well on street-facing doors where a solid panel would feel heavy.

Design options for custom patterns

Patterns can be geometric, floral, linear or abstract, and each one changes how light and shadow fall on the door throughout the day. We work from your sketch, reference image or a pattern you choose from our catalogue.

Geometric grids for a modern entrance
Scrolled or floral motifs for traditional buildings
Horizontal or vertical bars for a clean, architectural line
Mixed panels combining solid steel sections with open patterns

From drawing to installation

The process starts with your inquiry and photos of the entrance. We then measure on site, prepare a drawing and a written specification, and wait for your approval before production begins. This keeps the panel aligned with the door frame and the surrounding design.

Once approved, the panel is cut, welded and finished in our factory at 37 Rival Street, Tel Aviv, and then installed on the door. Each step is checked against the drawing so the final result matches what was agreed.

Materials and finishing for outdoor use

Because the panel faces weather, finishing matters as much as the pattern. We offer hot-dip galvanizing for corrosion protection, followed by powder coating in the colour you choose. This combination suits Israel's climate, with strong sun and coastal humidity.

Let your designer confirm the final colour on a sample before the full order is produced, since the same colour can look different in daylight and in the shade of a building.

Safety, fit and standards

An entrance panel must fit the door precisely and be fixed securely to the frame. The Israeli railing standard SI 1142 is a useful general reference when a panel also acts as a barrier, but exact dimensional values should always be checked with the engineer on the project.

We recommend confirming load, fixings and clearances on the drawing before approval, especially for heavier designs or doors that open onto steps or balconies.

Working with architects and designers

We regularly work from the drawings of architects and interior designers, adapting their pattern to the door's real dimensions. Clear specifications, dimensioned sketches and finish codes make the process faster and reduce changes during production.

If you are designing an entrance for a client, send us the drawing early so we can review feasibility, suggest practical adjustments and keep the design faithful to your intent.

Frequently asked questions

Can you make an ornamental iron panel from my own design?

Yes. We work from your drawing or sketch and check it for feasibility before production. If anything needs adjusting for strength or fit, we will explain the change before we start.

Do the panels need special finishing for outdoor entrances?

Yes, we recommend hot-dip galvanizing followed by powder coating for entrances exposed to sun and humidity. This protects the iron and keeps the colour stable over time.

How do you make sure the panel fits my existing door?

We take an on-site measurement and produce a drawing and written specification, which you approve before production. The panel is then made to those exact dimensions.

Can the panel be combined with a solid door or glass?

Yes, ornamental panels can be designed as an infill with solid steel sections or combined with glass, depending on privacy and security needs. We discuss the best combination during the design stage.

Common mistakes to avoid

A common mistake is choosing a pattern from a photo without checking the actual door size, which can leave the design too dense or too open. Skipping the finish choice for outdoor exposure can also lead to early corrosion.

Our recommendation

Approve a physical colour sample in the real light of the entrance before ordering, and confirm that the fixings and clearances are checked against the door's actual dimensions.

Summary

Ornamental iron panels give entrance doors character, light control and security when they are designed to measure and finished for outdoor use. Start with clear measurements and a sketch, and approve the drawing before production.

השאירו פרטים ונחזור אליכם