Aluminum Cladding Replacement and Facade Refurbishment

t503-13

Aluminum cladding replacement means removing worn or outdated facade panels and installing new custom aluminum panels or profiles that improve appearance and weather protection. It is usually done as part of a wider facade refurbishment, starting with an on-site survey and a written specification approved before production.

When Older Facades Need Cladding Replacement

Many older buildings reach a point where the facade looks tired, panels are dented or faded, or joints no longer seal well. Cladding replacement is often the most practical answer, because it updates the look of the building without rebuilding the structure behind it.

Visible corrosion, chalking or discoloration on existing panels
Loose fixings, bent sheets or damaged edges
Water entering around joints or window openings
A desire to change the architectural character of the building

A careful inspection will show whether the existing substructure can be reused or needs attention first.

Survey and Measurement Before Production

Accurate measurement is the foundation of any good cladding project. Our team visits the site, measures each elevation and checks levels, openings and existing fixings. Photos taken during the visit help the design process and record the starting condition of the building.

Measurements should be taken on the actual building rather than from old drawings, since older facades often differ from their original plans by several centimeters.

Design, Drawings and Written Specification

Architects and designers usually lead the design stage, and we work from their concept to produce detailed shop drawings. Each drawing shows panel sizes, joint positions, fixing points and how the cladding meets windows, balconies and roof edges.

A written specification accompanies the drawings. It describes materials, profile types, surface finish and installation sequence, so that everyone involved approves the same scope before any metal is cut.

Fabrication and Finishing in the Factory

Panels are cut, formed and assembled in our workshop at Rival Street 37 in Tel Aviv. Working in the factory gives tighter control over dimensions and allows consistent quality across the whole facade.

Finishing is chosen according to exposure and appearance. Options include powder coating in the colors selected by the designer, and surface protection suited to the coastal conditions common in our city. Your architect can confirm the exact finish to match the building.

Installation and Coordination on Site

Installation follows the approved sequence. Fixing brackets are set first, then panels are hung and aligned, and joints are sealed according to the detail drawings. Coordinating with the contractor and the building committee keeps the work safe and prevents delays around windows and balconies.

Protect neighboring surfaces and walkways during work
Check alignment at each floor before continuing
Document completed sections for the building file

Planning for a Smooth Refurbishment

The most successful facade projects begin with a clear brief and an early conversation between the owner, the designer and the metalwork supplier. Agreeing on the scope, the approval steps and the schedule at the start avoids changes later.

For railings, balconies and other safety-related elements, we follow the Israeli railing standard SI 1142 in general terms, and exact dimensions are always checked with the project engineer.

Frequently asked questions

How long does an aluminum cladding replacement take?

The duration depends on the size of the facade, the complexity of the design and the access conditions on site. Your project schedule will be confirmed in the written specification after the survey.

Can new aluminum cladding be installed over the old one?

In some cases yes, but it depends on the condition and strength of the existing surface. A site survey will show whether overlaying is suitable or whether removal is the better option.

Do you work with architects and interior designers on custom designs?

Yes, we regularly work with architects, designers, building committees and contractors. We produce drawings and specifications that follow their concept and approval process.

What information should I prepare before contacting you?

Photos of the building, a rough description of the facade and your goals are a good start. We will arrange an on-site measurement to confirm the details before any drawings are made.

Common mistakes to avoid

A common mistake is ordering panels from old drawings without measuring the building, which leads to misfits at openings. Another is skipping a written specification, which makes it hard to agree on finish, joints and installation responsibilities.

Our recommendation

Measure every elevation on site and approve the drawings and specification in writing before production starts. Ask your architect to confirm the finish under the real exposure conditions of your building.

Summary

Aluminum cladding replacement is an effective way to refresh an older facade when it is planned around a proper survey, clear drawings and an approved specification.

השאירו פרטים ונחזור אליכם