Start Your Custom Steel Security Gate Order: A Safe, Clear Process

t487-42

To start a custom steel security gate order, send photos and approximate dimensions of the opening, then book an on-site measurement so the gate is built to your exact opening. Safety comes from correct frame design, sound anchoring and a clear written specification that you approve before production begins.

What Information to Prepare Before You Order

A good order starts with clear information. Take photos of the opening from the street and from inside, and note the approximate width and height, the type of wall or pillar it attaches to, and whether the gate will open inward, outward or slide.

Photos of the existing opening and surrounding wall
Approximate width and height in centimeters
Preferred opening method: swing, sliding or folding
Desired finish and color
Any access needs such as pedestrian doors or keypads

The more complete your first message, the faster we can prepare an accurate proposal.

Why On-Site Measurement Matters

Security gates must fit the opening precisely, and small errors in a steel frame can cause alignment problems or weak points. Our team visits the site to measure the opening, check the level of the ground and confirm how the structure will be anchored.

During the visit we also look at the pillars, the thickness of the wall and any obstacles such as steps, drainage or nearby cables, so the design reflects real conditions rather than estimates.

Structural and Safety Checks in the Design

The frame is the backbone of a security gate. We design it to carry the weight of the panels, hinges or rollers, and the forces of daily use and wind. Frame profile size, wall thickness and the number of supports are chosen for each gate individually.

Railings and barriers in public or shared areas should follow the Israeli standard SI 1142 in its general requirements. Exact dimensional values depend on the project, and we confirm them with the responsible engineer before the specification is final.

Anchoring and Installation Requirements

Even a well-made gate can fail if it is poorly anchored. Anchor points must suit the wall or pillar material, whether concrete, block or existing steel. We specify the anchoring method in the written drawing so the installer knows exactly what to do.

Anchors matched to the wall material
Level and plumb alignment checked during installation
Hinge or roller load checked against the gate weight

Finishing for Durability

Steel exposed to the Israeli coastal climate needs protection. Hot-dip galvanizing gives strong corrosion resistance to the frame, and powder coating adds a durable, attractive finish in the color you choose. Together they keep the gate looking good and working smoothly for years.

Ask us about the finish suited to your location, especially if the gate faces the sea or sits in a shaded, damp spot.

From Approval to Delivery

Once measurements are taken, we prepare a drawing and a written specification covering dimensions, materials, finish, opening method and anchoring. You review and approve it before any production starts. This prevents misunderstandings and keeps the order transparent.

After approval the gate is produced in our factory at 37 Rival Street, Tel Aviv, finished, and installed at your site by our team.

Frequently asked questions

Do I need to measure the opening myself before ordering?

Rough measurements help, but you do not need to be exact. We take precise measurements on site before any production begins.

Can a security gate be made to fit an unusual or uneven opening?

Yes. Custom steel work is designed for the specific opening, and we adjust the frame and fixings to suit uneven walls or ground.

How do I know the design is safe?

Each order includes a written specification covering frame, anchoring and finish, which you approve before production. Where needed, we confirm details with the responsible engineer.

Is a gate suitable for a seaside or humid location?

Yes, with the right protection. Hot-dip galvanizing and powder coating help steel resist corrosion in damp and coastal conditions.

Common mistakes to avoid

Ordering from a rough estimate without an on-site measurement, or skipping the written specification, often leads to poor fit and avoidable rework. Always approve the drawing before production starts.

Our recommendation

Before you order, confirm the wall or pillar material and how the gate will be anchored, since this affects both safety and installation. Ask for the specification in writing and review the anchoring and finish details carefully.

Summary

A custom steel security gate order starts with clear photos and dimensions, an on-site measurement, and a written specification you approve before production at our Tel Aviv factory.

השאירו פרטים ונחזור אליכם