Steel Frame Measurement: A Step-by-Step Guide

t488-0

Custom steel frame measurement starts with an inquiry and photos, followed by an on-site survey where exact dimensions are taken. Those measurements become a drawing and written specification, which the client approves before the frame is fabricated in the factory and installed.

Step 1: Send an Inquiry with Photos

The process begins with a simple inquiry. Send us photos of the area where the steel frame will go, along with a short description of what you need, such as a gate, a pergola, a staircase, or a set of window bars. Photos of the surrounding wall, floor, and nearby structures help us understand access and fit before we visit.

Tell us what you already know about the site, including whether it is a new build or an existing building and what materials surround the opening. This early information saves time later and helps us decide whether a site visit is needed right away.

Step 2: On-Site Measurement

A technician visits the location to take precise measurements. Steel frames depend on exact dimensions, so we measure widths and heights at several points, since walls and floors are rarely perfectly straight or level. We also note the depth of recesses, the condition of the surface, and any obstacles such as pipes, electrical boxes, or doors that swing into the space.

Opening width and height at top, middle, and bottom
Wall thickness and depth of recess
Floor level and slope
Access route for transporting the finished frame

Step 3: Drawing and Written Specification

Using the site measurements, we prepare a drawing that shows the frame layout, dimensions, and how it will be fixed to the structure. A written specification accompanies the drawing and lists the profiles, materials, finish, opening direction, and any special features you have chosen. Reviewing both documents together makes it easier to catch anything that does not match what you pictured.

Step 4: Client Approval

Nothing goes into production until you approve the drawing and specification. Take your time to check the dimensions, the appearance, and the finish. If something needs adjusting, we revise the drawing and send an updated version. Once you sign off, the order is locked in, so changes after this point can be costly and slow.

Step 5: Factory Production and Finishing

After approval, the steel is cut, welded, and assembled in our factory on Rival Street in Tel Aviv. Frames are then finished according to the specification, typically by hot-dip galvanizing for corrosion protection followed by powder coating for colour and durability. Working in the factory allows precise control over each joint and surface before the frame leaves the workshop.

Step 6: Installation at Your Site

The finished frame is transported to your site and installed by our team. We check alignment, level, and fixing before we finish, and we confirm that opening and closing movements work as intended. For structural or safety-related elements, final details such as fixing methods and any required values are verified with the engineer on the project.

Frequently asked questions

How long does the measurement visit take?

Most on-site surveys are completed in a single visit, though larger or more complex projects may need more time. We will confirm the visit length when we arrange it.

Do I need to be home during the measurement?

It helps if someone is present to show the access points and discuss the layout. You do not need to be there for the entire visit if you are comfortable with the plan.

Can I change the design after approving the drawing?

Changes are possible before approval without any issue. After you approve, production begins, so further changes may affect timing and cost and should be discussed as early as possible.

Who is the process suitable for?

It suits homeowners, building committees, contractors, architects, and interior designers planning custom steel work such as gates, railings, pergolas, stairs, and structural frames.

Common mistakes to avoid

A common mistake is measuring only once or relying on approximate dimensions from the building plan, since real walls are often uneven. Skipping careful review of the approved drawing can also lead to surprises at installation.

Our recommendation

Measure the opening yourself as a rough check, but let the professional survey set the final dimensions and confirm the access route for delivery. Review the drawing line by line before approving, paying special attention to opening direction and finish.

Summary

Custom steel frame measurement moves from inquiry and photos to an on-site survey, a drawing and specification, client approval, factory production, and installation. Following each step carefully keeps the final frame accurate and fitting well.

השאירו פרטים ונחזור אליכם