Custom Aluminum Sliding Gate Manufacturing for Modern Facades

Why choose aluminum for a sliding gate

Aluminum is one of the most practical materials for a sliding gate that faces the street every day. It is light, so the carriage places less load on the rail, the motor and the posts. It does not rust the way untreated steel does, which matters in the coastal air of Tel Aviv and in areas with humidity and salt.

For modern facades, aluminum also allows clean, slim profiles and a precise finish that blends with stone, glass and render. The gate can look like part of the building rather than an added barrier.

Sliding gates versus swing gates for parking

A sliding gate suits properties where there is no room for a leaf to swing out, or where the driveway runs along a wall. It moves along a rail and stays within the plot line. A swing gate can work well when there is clear space in front of the entrance and a wider opening is needed.

• Sliding: saves space, suits narrow frontages and slopes.
• Swing: suits open forecourts and symmetrical entrances.

We help you choose the type that fits the site before any drawing is started.

Electric operation and safety

Electric sliding and swing parking gates are fitted with a motor, control unit, remote access and safety sensors. The lightweight aluminum carriage makes the motor work less, which supports smoother movement and a quieter operation. Sensors should be placed so that the gate stops or reverses when an obstacle is detected.

Safety requirements for gates and railings in Israel reference the national standard SI 1142 in general terms. Exact values, clearances and sensor positions are checked together with the engineer for each project.

Measurement, drawing and specification

Every gate begins with an on-site measurement. We check the opening width, the ground levels, the wall or post construction and the position of the motor and cabling. Based on this, we prepare a drawing and a written specification that describes the profiles, infill, finish and operating system.

You review and approve the drawing before production starts. This step prevents surprises at installation and keeps the gate matched to the facade.

Production and finishing in our factory

The gate is cut, assembled and welded or mechanically joined in our workshop on Rival Street in Tel Aviv, operating since 1945 and run today by the third generation of the family. Aluminum components are finished to resist weather, and steel parts used for hardware or reinforcement are protected by hot-dip galvanizing or powder coating.

• Color and finish chosen to match your facade.
• Pre-assembly checks before delivery to site.

Installation and long-term care

Installation includes fixing the rail or hinges, mounting the gate, connecting the motor and testing the safety functions. We recommend an annual check of the rail, rollers or hinges, the motor and the sensors, and cleaning of the track so that debris does not block movement.

With regular care, a well-made aluminum gate keeps its appearance and operation for many years.

Frequently asked questions

Is an aluminum sliding gate strong enough for daily use?

Yes, when the profiles, wall of the frame and hardware are designed for the gate's width and weight. The drawing is calculated for the specific opening and use before production.

Can an aluminum gate be automated later?

Often yes, provided the gate and rail are planned for a motor from the start. We can advise on the cabling and mounting positions during measurement.

How do you protect the gate from corrosion?

Aluminum resists rust naturally, and steel parts are protected by hot-dip galvanizing or powder coating. The finish is chosen to suit the coastal climate of Tel Aviv.

How do I start a project with you?

Send photos of the entrance and a short description of the opening, and we arrange an on-site measurement, followed by a drawing and written specification for your approval.

Common mistakes to avoid

Choosing a gate by appearance alone and ignoring weight, rail support and motor requirements often causes noise and early wear. Skipping the on-site measurement and drawing approval also leads to fitting problems at installation.

Our recommendation

Measure the opening and check the ground and wall conditions before deciding between sliding and swing, and plan the motor and cabling at the design stage. Ask for a written specification that lists the profiles, finish and safety sensors before you approve production.

Summary

Custom aluminum sliding gates from Techno Kol Uzi are lightweight, corrosion-resistant and made to measure for modern facades. Each one is measured, drawn, approved and finished in our Tel Aviv factory before installation.

Related guides

• Custom Stainless Steel Electric Gate Fabrication for Coastal Properties
• Installing Pedestrian Gate Doors Beside Electric Vehicle Gates
• Custom Glass-Infill Electric Gate Design and Fabrication
• Installing Emergency Manual Release Mechanisms on Electric Gates
• Replacing Solid Gate Panels With Perforated Metal Infill
• Installing Solar Power Kits for Off-Grid Electric Gates
• All models in this category