Pedestrian Gate Beside a Driveway Gate: Installation Guide

t293-26

A pedestrian gate beside a driveway gate gives you walk-through access without opening the vehicle gate. It works best when the pedestrian door is positioned so the swing or slide of the main gate never blocks it. Techno Kol Uzi manufactures matching pedestrian and electric parking gates to measure from its Tel Aviv workshop.

Why Add a Separate Pedestrian Gate?

Opening a large electric gate every time someone needs to walk through wastes energy and time, and it leaves the driveway open longer than necessary. A dedicated pedestrian gate lets residents, visitors, and delivery staff enter on foot while the vehicle gate stays closed. It also keeps children and pets away from moving vehicle gates.

Many owners choose this arrangement for security as well, since the vehicle gate can remain locked while the walk-through door uses its own lock or access control.

Choosing the Right Position

Placement decides how well the two gates work together. The pedestrian door should sit where the vehicle gate does not swing into it or slide across it, and it should open onto a clear path rather than onto the driveway itself.

Check the full travel path of a swing gate, including the arc of its leaves.
For sliding gates, leave clear space at the track ends.
Keep the walkway clear of planters, poles, and parked cars.

Matching Design and Materials

A pedestrian gate that matches the main gate in frame profile, infill pattern, and finish looks intentional and protects the overall appearance of the entrance. We build both from the same iron, aluminum, or stainless steel, so they age and weather together.

Finishing options such as hot-dip galvanizing and powder coating are applied to both gates to keep corrosion protection consistent across the entrance.

Safety and Access Control

Pedestrian doors should be fitted with a reliable latch, a self-closing mechanism where appropriate, and a lock compatible with your access system. Gap sizes, clearances, and guard heights are checked against the Israeli railing standard SI 1142 and confirmed with the engineer during design, rather than assumed.

Consider an intercom or card reader on the walk-through gate if visitors arrive on foot frequently.

From Inquiry to Installation

The process starts with your photos and a description of the entrance. We then measure on site, prepare a drawing and written specification, and wait for your approval. Once approved, the gates are produced in our factory at 37 Rival Street, finished, and installed at your property.

Measuring on site first avoids surprises, especially where the pedestrian door must clear an existing wall, pillar, or the vehicle gate's movement.

Maintenance Over Time

Both gates need periodic checks of hinges, rollers, latches, and seals. Keep the pedestrian gate's closing mechanism adjusted so it latches fully every time, and clear debris from the sliding track of the vehicle gate. Regular checks extend the life of both gates and keep them working smoothly together.

Frequently asked questions

Can a pedestrian gate be added to an existing electric driveway gate?

In many cases yes, provided there is enough space beside the vehicle gate and the wall or pillar can carry the new gate's hinges or posts. A site measurement is needed to confirm the layout.

Should the pedestrian gate open inward or outward?

It depends on the space available and the direction of foot traffic. Outward opening is common, but it should never swing onto a public walkway or into the vehicle path.

Does a pedestrian gate need a special lock?

It should use a lock that suits your access method, such as a key, code, or card reader. Locks are chosen to match whether the gate is used by residents only or also by visitors.

Do the two gates need to look the same?

They do not have to be identical, but matching frame profiles and finishes give the entrance a cohesive appearance and are usually the most attractive choice.

Common mistakes to avoid

Placing the pedestrian gate inside the swing path of the vehicle gate is a common error that blocks access. Skipping an on-site measurement before ordering also leads to clearance problems.

Our recommendation

Before you choose a position, mark the full opening arc of the vehicle gate on the ground and stand inside it to check clearance. Ask for a written drawing that shows both gates together.

Summary

A pedestrian gate beside a driveway gate offers convenient walk-through access and better security. Careful positioning and matching design make the entrance work well for years.

השאירו פרטים ונחזור אליכם