Glass Infill Electric Gates Made to Measure at Techno Kol Uzi

What a Glass Infill Gate Is

A glass infill gate is a parking or entrance gate built on a metal frame, with the open spaces filled by glass panels instead of solid sheet or dense bars. The frame carries the structural load, while the glass provides the visual character. This approach suits homeowners who want the entrance to feel light and modern without giving up a sense of enclosure.

Because the frame does the structural work, the glass can be chosen for its look and privacy level rather than its strength alone.

Balancing Openness and Privacy

The main decision is how much you want to see through the gate. Clear glass lets light and views pass through, while frosted, tinted, or patterned glass softens the view of cars and the driveway from the street. Many owners choose clear glass at higher levels and a more opaque finish lower down, where the view from the street is most direct.

• Clear glass for maximum openness and light
• Frosted or patterned glass for partial privacy
• Mixed panels for a layered look

Sliding or Swing: Choosing the Right Operation

An electric sliding gate runs along a track and suits driveways where there is limited space in front of the entrance. An electric swing gate opens outward or inward on hinges and works well when there is room to swing. Both can carry glass infill, and the choice depends on your site layout, the width of the opening, and how the gate will be used day to day.

We look at the space on site before recommending an operation type, so the gate moves freely without conflicting with the car, the sidewalk, or nearby walls.

Our Design and Fabrication Process

Every glass infill gate starts with an inquiry and photos of your entrance. We then measure on site and prepare a drawing with a written specification covering frame profile, glass type, and operator. Once you approve the design, the frame is fabricated in our Tel Aviv factory on Rival Street, where we work with iron, aluminum, and stainless steel.

Finishing is done with hot-dip galvanizing or powder coating, depending on the frame material and the exposure of the site. The gate is then installed and the electric operator is set up and tested.

Safety and Standards

Gates that include glass and moving parts need careful attention to safety. Glass must be suitable for the application, and the gate should include appropriate sensors so it reverses when it meets an obstruction. Where pedestrians pass close to the gate, the design should account for clearances and edges.

Requirements that apply to railings and guarding, including the Israeli standard SI 1142, are checked with your engineer. We do not state exact dimensional values here; they depend on your specific installation and are confirmed during planning.

Maintenance and Long-Term Care

A glass infill gate is simple to care for. Clean the glass with water and a soft cloth, check that the tracks or hinges are free of debris, and keep the operator's moving parts lubricated as recommended. Inspect the finish once or twice a year, especially in coastal areas where salt air can affect metal surfaces.

If you notice a change in how the gate runs, such as slowing or catching, have it checked early rather than waiting for a larger problem.

Frequently asked questions

Can a glass infill gate be automated?

Yes. Both sliding and swing glass infill gates can be fitted with electric operators and safety sensors. We confirm the right operator for your gate's size and weight during the planning stage.

Is glass safe on an electric gate?

When the correct glass type is chosen and the gate has proper safety sensors, it can be used safely. We discuss glass options with you so the choice suits your privacy and safety needs.

How is the gate designed for my entrance?

We start with photos and an on-site measurement, then prepare a drawing and written specification. The design is made to your measurements and approved by you before fabrication begins.

Can the gate match the style of my home?

Yes. Frame profiles, glass finishes, and coatings can be chosen to suit a modern, classic, or minimal look. We help you select options that work with your building and surroundings.

Common mistakes to avoid

Choosing glass and operation type before measuring the site is a common error that leads to layout conflicts. Ignoring privacy needs or safety sensors can also leave owners unhappy after installation.

Our recommendation

Decide on the level of privacy first, then choose the glass accordingly, and always confirm the operation type after an on-site measurement. Mixing clear and frosted panels often gives the best balance of openness and privacy.

Summary

A custom glass infill electric gate can give your entrance an open, modern look while keeping a sense of privacy. Built to measure in our Tel Aviv factory, it can be designed around your space and operation needs.

Related guides

• Replacing Solid Gate Panels With Perforated Metal Infill
• Custom Stainless Steel Electric Gate Fabrication for Coastal Properties
• Replacing Gate Infill Panels to Improve Privacy and Wind Load
• Custom Aluminum Sliding Gate Manufacturing for Modern Facades
• Custom Double Swing Electric Gate Manufacturing for Wide Entrances
• Installing Pedestrian Gate Doors Beside Electric Vehicle Gates
• All models in this category