Gate Battery Backup Installation for Electric Parking Gates

t292-45

A gate battery backup installation keeps an electric sliding or swing gate working when the power goes out, so you can still drive in and out. It works by adding a battery and charger to the gate operator, and the right setup depends on the gate's weight, size and how often it is used.

Why a backup battery matters for your gate

An electric gate is only convenient when it opens. During a power cut, a gate without backup can leave you stuck outside or locked in, and it can also block a fire or emergency vehicle route. A battery backup keeps the operator running for a set period so you can move the gate by remote or keypad as usual.

Before deciding, think about how often you drive in and out, whether you have a second exit, and whether the gate serves a building committee or a private home. Those answers shape the battery size and the way the system is wired.

Start with an inquiry and on-site measurement

The process begins with an inquiry where you send photos of the gate, the operator box and the area around the gate. We then visit the site to measure the gate leaf, check its weight, see how the operator is mounted and confirm where power comes from.

Gate type: sliding or swing, and the leaf length and height
Current operator model and its mounting position
Location of the electrical supply and the nearest socket
Space available for a battery housing near the operator

These details tell us whether your existing operator can take a battery kit or whether a different setup is needed.

Planning the battery and charger

Once measured, we prepare a written specification covering the battery type, charger, wiring route and expected run time during an outage. The run time depends on how heavy the gate is and how many cycles you need. Exact electrical values are checked with the engineer on your project, so the numbers match your operator and site.

For gates used by a building committee, we also consider a shared-access plan so that residents can still enter during a long outage. Drawings and the specification are sent to you for approval before any work starts.

Production and finishing in our Tel Aviv factory

After you approve the specification, the mounting brackets, battery housing and any steel frame modifications are made in our factory at 37 Rival Street, Tel Aviv. Working to measure in our own workshop lets us fit the housing exactly to your gate and protect it from weather.

Metal parts are finished with hot-dip galvanizing or powder coating, depending on the gate material and the exposure of the site. This helps the housing and brackets last in the outdoor conditions common in Israel.

Installation and testing on site

On installation day, the battery housing is fitted beside the operator, the charger is connected, and the wiring is run according to the approved drawing. We then test the gate on mains power and again with the supply switched off, checking that it opens and closes smoothly and that the battery charges correctly.

We walk you through the remote controls, the manual release and how to tell when the battery needs replacing, so you know what to expect in a real outage.

Keeping the system working over time

A battery backup is only useful when it is charged and healthy. Check the charge indicator from time to time, keep the housing clear of water and debris, and test the gate on battery occasionally. Batteries wear out over the years, so plan to replace them when the gate starts to slow or the run time drops noticeably.

If your gate is also used for deliveries or heavy traffic, let us know during the inquiry so the battery and charger are sized for that load.

Frequently asked questions

Will a battery backup work with any electric gate?

Not always. The operator must be compatible with a battery kit, and the gate's weight and size affect what is possible. Send photos and measurements so we can confirm your gate is suitable.

How long will the gate work during a power cut?

Run time depends on the battery, the gate's weight and how often it cycles. We give an estimate in the written specification, with exact values checked with the engineer for your site.

Can I still open the gate by hand during an outage?

Yes. Electric gates should have a manual release, and we show you how to use it during installation. Keep the key or release tool somewhere accessible to everyone who uses the gate.

Do I need to measure the site before ordering?

Yes. We measure the gate, check the operator and confirm the power supply on site before preparing any drawing or specification, so the battery kit fits your actual gate.

Common mistakes to avoid

A common mistake is buying a battery without checking whether the operator and gate weight can support it, which leads to slow or failed operation. Another is forgetting that a battery needs periodic charging and replacement, so the backup quietly stops working when it is needed most.

Our recommendation

Measure and test the gate on battery before you rely on it, and set a yearly reminder to check the charge and battery condition. Mention any heavy use or shared access during the inquiry so the system is sized correctly from the start.

Summary

A gate battery backup installation keeps your electric gate working in an outage when it is planned around measurement, the right battery and proper testing. Start with photos and an on-site visit to get a specification that fits your gate.

השאירו פרטים ונחזור אליכם