Book a Parking Barrier Site Survey with Techno Kol Uzi

t460-40

To book a parking barrier site survey, contact Techno Kol Uzi with photos of your entrance and a short description of the vehicles and traffic. We then visit the site, take measurements, and prepare a written specification before any production starts.

Why a Site Survey Comes First

A parking barrier works only when it fits the exact space where it will stand. Widths, slopes, ground conditions, cable routes and the space needed for the arm to swing all affect the final design. A photo alone rarely shows these details, so an on-site visit is the starting point of every project.

During the survey we confirm the real opening, check the surface the barrier will be fixed to, and look at how cars and delivery vans approach the gate. This prevents surprises after production and keeps the installation smooth.

What Happens During the Visit

Our technician arrives at the agreed time and walks the entrance with you. The visit usually covers the following points:

Measuring the clear opening and the depth available for the barrier
Checking the ground, existing pavement and drainage
Noting power supply and where a control cable can run
Reviewing the traffic pattern and sight lines for drivers

You are welcome to show us any existing gate, access system or concerns about the layout.

From Measurements to a Written Drawing

After the visit we prepare a drawing and a written specification based on the measured dimensions. The document describes the barrier model, arm length, finish and how it will be fixed. We send it to you for review so you can see exactly what will be built.

If anything in the drawing does not match what you expected, this is the moment to raise it. Changes are much simpler before production than after installation.

Client Approval and Production

Once you approve the drawing and specification, the work moves into our factory on Rival Street in Tel Aviv. Our team cuts, welds and assembles the barrier components to the measured dimensions, then applies the chosen finish.

Keeping production in our own workshop allows close control over each part. You receive a clear timeline for each stage so you know when the barrier will be ready for installation.

Finishing and Installation

Components are finished with the protective treatment selected for your site, such as hot-dip galvanizing or powder coating, depending on the exposure and look you want. After finishing, the barrier is transported and installed at your entrance.

During installation we check alignment, the swing of the arm and the connection to power and control systems. We then walk through the operation with you so you know how to use it day to day.

Preparing for Your Visit

A little preparation makes the survey faster and more accurate. Before we arrive, it helps to have the following ready:

Photos of the entrance from the street and from inside the parking area
Information about the type of vehicles that will use the barrier
Any plans, existing gate details or access system information you have
Access to the site and a contact person on the day

Send these details when you book, and we will confirm the visit time.

Frequently asked questions

How do I book a parking barrier site survey?

Contact us with photos of the entrance and a short description of your parking area and vehicles. We will confirm a suitable time for the on-site visit.

Do I need to be present during the survey?

It is recommended that someone who knows the site and access requirements is present. This helps us understand traffic patterns and any concerns you have.

What do you check during the visit?

We measure the opening and depth, check the ground and drainage, note power and cable routes, and review how vehicles approach the barrier.

Will I see the plan before production starts?

Yes. We send a written drawing and specification for your approval, and production begins only after you confirm them.

Common mistakes to avoid

Booking installation before measuring the site often leads to a barrier that does not fit the opening or the surrounding space. Skipping the written approval step can also cause costly changes later.

Our recommendation

Prepare clear photos and note the vehicle types before the visit, and ask for the drawing to be reviewed carefully before approving production.

Summary

A parking barrier site survey covers measurements, ground and power checks, a written drawing, approval, factory production and professional installation.

השאירו פרטים ונחזור אליכם