Custom Parking Barrier Production: What Happens After You Order

t460-16

A custom parking barrier order starts with an inquiry and photos, followed by on-site measurement, a written drawing and specification, and your approval. Once approved, the barrier is built to your measurements in our factory, finished, and then installed at your site.

Step 1: Inquiry and Photos

Every custom parking barrier begins with a short inquiry. Send us photos of the entrance, the gate posts or wall where the barrier will sit, and a brief description of how the space is used. Tell us whether the barrier is for a private driveway, a building committee, or a commercial lot, because this affects the design and the type of operation.

Photos help us spot site conditions early, such as limited turning space, slopes, or existing cables. A clear inquiry lets us reply with the right questions instead of a long back-and-forth.

Step 2: On-Site Measurement

After reviewing the inquiry, our team visits the site to measure the opening, the mounting surfaces, the ground levels and the clearance the barrier arm needs to swing. Non-standard entrances rarely match a catalogue size, so measuring on site is what makes the final fit correct.

Clear width and height of the opening
Foundation or base location and ground condition
Path the arm must travel and any obstacles
Power and cable routes if an operator is planned

Step 3: Drawing and Written Specification

From the measurements we prepare a drawing and a written specification. The drawing shows the barrier layout, arm length, post positions and mounting details. The specification lists the materials, profiles, finish and the components you are approving.

Please read both documents carefully. This is the stage where changes are cheapest and easiest to make, so ask about anything that is unclear before approval.

Step 4: Client Approval

Production starts only after you approve the drawing and specification in writing. Your approval confirms the dimensions, the design and the scope of work. If you need a change after approval, we review how it affects the drawing and the schedule before continuing.

Step 5: Factory Production and Finishing

Once approved, the barrier is cut, welded and assembled in our factory in Tel Aviv, following the approved drawing. Steel parts are then finished, typically with hot-dip galvanizing and powder coating, to protect them from weather and daily use. The finished barrier is checked against the drawing before it leaves the workshop.

Step 6: Installation at Your Site

The barrier is installed on the prepared base or posts at your site. Our installers align the arm, check that it moves smoothly across its full travel, and confirm that the mechanism and any operator work as intended. Installation is complete when the barrier is level, secure and tested with you present.

Frequently asked questions

How long does a custom parking barrier order take?

The timeline depends on the complexity of the design, the measurement visit and the finishing process. We confirm the schedule with you after the drawing is approved.

Do I need to be present for the on-site measurement?

It helps to be there or to have someone who can show the entrance and answer questions about how vehicles use the space. This avoids errors in the measurements.

Can I change the design after approving the drawing?

Changes are possible, but they are reviewed before production continues because they can affect the drawing, materials and schedule. Raise any concerns before you approve.

Who installs the barrier?

Installation is carried out by our team after production and finishing, and we check the operation with you before completing the job.

Common mistakes to avoid

Approving the drawing without checking the arm path and clearances is the most common error. Measuring the opening once and assuming the ground is level can also lead to a poor fit.

Our recommendation

Mark the full arm swing on the ground with paint or string before the measurement visit, so we can confirm the clearance on site. Share any future plans for the entrance, such as a new gate or operator, at the start.

Summary

A custom parking barrier moves from inquiry and on-site measurement to a written drawing, your approval, factory production, finishing and installation. Clear photos and accurate site details make each step faster.

השאירו פרטים ונחזור אליכם