Frameless Glass Balustrade Manufacturing for Modern Buildings

t349-1

A frameless glass balustrade is a guard barrier made of toughened glass panels fixed directly to the floor, slab edge or structure with minimal visible hardware, so the view stays unobstructed. Techno Kol Uzi manufactures these to measure at its Tel Aviv factory, after an on-site survey and written specification approved by the client.

What a Frameless Glass Balustrade Is

A frameless glass balustrade uses no continuous top rail or metal frame around the glass. Each panel is held by discreet point fixings, base channels or a handrail-free profile, which keeps the sightline clean and lets light pass through balconies, terraces and stairs.

This approach suits modern facades where the building itself is the feature. The glass is the barrier, so every detail of its thickness, fixing and edge finish matters for both safety and appearance.

Where Architects Use Them

Frameless glass is common on penthouse terraces, residential balconies, rooftop decks, glazed staircases and internal mezzanine edges. Designers choose it when they want a barrier that almost disappears against a view or an open interior.

Balconies and terraces with sea or city views
Staircases and mezzanine guards
Lobbies and atriums
Pool and garden edges

Glass Specification and Safety

Glass for balustrades is normally toughened or laminated, chosen for impact performance and for how it breaks. Thickness, panel height and fixing type are set by the load the barrier must resist and by the applicable Israeli railing standard, SI 1142.

We do not quote numeric values from standards in this page. The exact glass make-up, fixing spacing and base-channel detail are checked with the structural engineer on each project before production begins.

Our Manufacturing Process

Work begins with an inquiry and photos, followed by an on-site measurement of openings, slab levels and substrate. From these we prepare a drawing and a written specification covering glass type, fixings, edge finish and installation method.

Once the client approves the drawing, the panels and metal components are produced in our factory. Steel parts are finished with hot-dip galvanizing or powder coating where needed, and the glass is delivered and installed on site by our team.

Fixings, Finishes and Detailing

The choice of fixing defines the look. Common options include base-mounted shoe channels, side-mounted point fixings and glass-to-slab clamps, each with a different level of visible hardware.

Stainless steel and dark powder-coated metalwork are popular finishes for the fixings, while glass edges can be polished to suit the design. Clear coordination with the architect at the drawing stage avoids surprises on site.

Coordination with Developers and Contractors

Frameless balustrades depend on the structure they fix into, so early coordination with the developer, contractor and engineer saves time. We agree on fixing positions, slab tolerances and waterproofing details before the glass is ordered.

Our work at 37 Rival Street in Tel Aviv, a shop run by the third generation of the family since 1945, means clients deal directly with people who build the product and stand behind the installation.

Frequently asked questions

Is a frameless glass balustrade safe for a balcony?

Yes, when the glass, thickness and fixings are designed for the load and the applicable standard. We confirm all values with the structural engineer before production.

Can frameless glass be installed on an existing slab?

Often yes, but the slab's condition, edge profile and fixing capacity must be inspected first. An on-site measurement is the first step to confirm feasibility.

What glass type is used for these railings?

Toughened or laminated safety glass is standard, selected for impact performance and safe breakage. The final make-up depends on the project and engineering requirements.

How do I start a project with Techno Kol Uzi?

Send an inquiry with photos of the location. We then arrange an on-site measurement, prepare a drawing and written specification, and proceed once you approve it.

Common mistakes to avoid

Choosing glass thickness and fixings without checking the load and standard requirements is the most common error. Ordering glass before confirming the slab and fixing positions on site often causes costly rework.

Our recommendation

Involve the structural engineer and the glass fabricator at the concept stage, not after the drawings are finished. Confirm fixing type and base detail early, since they determine the final visual result as much as the glass itself.

Summary

Frameless glass balustrades offer a clear, minimal barrier when designed around the right glass, fixings and structure. Early measurement and specification keep the result safe and true to the design.

השאירו פרטים ונחזור אליכם