Renovating Wash Stations with Custom Stainless Steel

t475-43

A custom stainless steel wash station is built to the exact dimensions, drainage layout and workflow of your room, so it fits the space and the hygiene rules your facility must follow. Renovating with a made-to-measure unit usually means removing the old fixtures, measuring on site, producing the new stainless steel works in our Tel Aviv factory, and installing it with clean, sealed joints.

Why a custom wash station instead of an off-the-shelf unit

Standard wash sinks and counters rarely match the real dimensions of a clinic, laboratory or food plant. Walls are not always square, pipes sit in unexpected places and doorways limit what can be moved in. A custom stainless steel wash station is designed around those conditions instead of forcing the room to adapt to the product.

Custom work also lets you plan the workflow: dirty items enter from one side, pass through washing and rinsing, and leave on the clean side without crossing paths. That layout is often the biggest gain of a renovation.

Planning the layout before production

Good planning starts with a list of what will be washed, how often, and by whom. Note the largest item that must fit, the number of basins needed, and where water, drainage and power enter the room.

Clear route from soiled to clean areas
Space for staff to stand and move comfortably
Access to pipes and valves for future maintenance

Share these notes and photos with us at the inquiry stage so the drawing reflects real use.

Choosing the right stainless steel and finish

Stainless steel is chosen for its resistance to moisture, cleaning agents and repeated washing. The grade and surface finish should match the environment. A brushed or satin finish is practical for daily use, while a smoother finish is easier to wipe clean in areas with strict hygiene demands.

Edges, corners and joints matter as much as the sheet itself. Rounded corners and continuous welds leave fewer places where dirt can collect, which simplifies cleaning and inspection.

On-site measurement and drawing

Before anything is cut, our team visits the site to measure the room, the existing connections and the surrounding finishes. We record wall irregularities, floor slope toward drains and the height of any fixed equipment.

You then receive a drawing and a written specification describing dimensions, materials, finish and fittings. Please review and approve these carefully, because approval is the step that locks the production plan.

From factory to installation

Once approved, the unit is fabricated in our factory, where stainless steel sheets are cut, bent and welded to the drawing. Each piece is checked for fit before it leaves the workshop, which reduces surprises on site.

Installation is planned around your operating hours. We remove the old unit, position the new one level and secure it, then connect the water and drainage points and seal the joints so that moisture cannot reach the wall or floor behind.

Maintenance and long-term care

Stainless steel is low-maintenance, but it still benefits from routine care. Rinse surfaces after use, avoid harsh abrasives that scratch the finish, and check sealant lines regularly for cracks or gaps.

Wipe with a soft cloth and mild cleaner
Dry surfaces to prevent water spots
Inspect joints and fixings every few months

Following these habits keeps the wash station hygienic and looking new for years.

Frequently asked questions

How long does a custom wash station renovation take?

The timeline depends on the size of the unit and the complexity of the layout. After approval, production is scheduled and installation is planned with you to limit disruption to your operations.

Do I need to remove the old wash station myself?

No. When the work is agreed, our team handles removal and installation as part of the job, so you do not need to coordinate separate trades for the stainless steel element.

Can the wash station match the rest of my facility?

Yes. Finish and dimensions can be selected to suit the existing equipment and the overall look of the room, while keeping the surfaces practical to clean.

Is stainless steel suitable for food plants and labs?

Stainless steel is widely used in these settings because it withstands moisture and cleaning agents well. The grade and finish should be chosen with your specific cleaning routine and regulations in mind.

Common mistakes to avoid

Ordering before measuring the room on site is the most common error, leading to units that do not fit or drain properly. Skipping a clear workflow plan can also create crossed paths between soiled and clean items.

Our recommendation

Map your washing sequence on paper before requesting a quote, and make sure drainage slope and access for maintenance are included in the drawing. Those two details prevent most problems after installation.

Summary

A custom stainless steel wash station, planned around your room and workflow, gives clinics, labs and food plants a durable and hygienic renovation.

השאירו פרטים ונחזור אליכם