Booking a Steel Frame Site Measurement Visit at Techno Kol Uzi

t488-43

To book a steel frame site measurement, contact Techno Kol Uzi with photos and a short description of the space, then schedule an on-site visit where our team measures the openings and checks the structure. The measurements feed a drawing and written specification that you approve before anything goes into production.

Why an On-Site Measurement Matters

Steel frames are made to measure, so the accuracy of the first visit decides how well everything fits later. A photo can show the general shape of a balcony or opening, but it cannot show out-of-level floors, uneven walls or the exact clearance around a door swing.

During the visit we measure each opening at several points, note how the surrounding structure is built and confirm where anchors or fixings can go. This is the step that prevents surprises when the frame arrives at the site.

How to Book Your Visit

Booking is simple. Send us a message with photos of the area, a rough sketch if you have one, and a few words about what you need: a steel frame, a pergola, a parking gate or a custom structure. This helps us plan the right visit and bring the right tools.

Photos of each opening or area, taken straight on and from the side
Approximate location of the building on Rival Street or your address details
Preferred days and times, and who will be present
Any access notes such as stairs, parking or building committee rules

What We Check on Site

Our technician measures width, height and depth, and checks whether the floor, wall or ceiling is level and plumb. We look at the material of the existing structure, because concrete, brick and older steel each need a different fixing approach.

We also discuss sun exposure, wind, access for installation and how the frame will open or be used. If your project has a building committee or an architect, it helps to have their requirements in hand during the visit so they can be included from the start.

From Measurement to Drawing and Approval

After the visit we prepare a drawing and a written specification covering dimensions, profile types, connection details and the finish. You review the drawing and tell us about any changes before we confirm the order.

Approval is important because every change after production begins costs time. Take your time with the drawing, check every dimension against what you remember from the site, and ask questions about anything that is not clear.

Production and Finishing in Our Factory

Once the drawing is approved, the frame is cut, welded and assembled in our factory on Rival Street in Tel Aviv. Working in the factory lets us control the quality of every joint before the steel leaves the workshop.

Finishing depends on the project and the exposure. Hot-dip galvanizing gives strong corrosion protection for outdoor steel, and powder coating offers a wide choice of colors. We will recommend the option that suits where the frame will stand.

Installation at Your Site

Installation is planned around the measurements taken during the visit. Our crew brings the assembled frame, fixes it according to the approved drawing and checks alignment, level and operation before leaving the site.

For load-bearing elements or railings, the exact requirements are confirmed with the engineer, including the relevant Israeli railing standard SI 1142, and we do not assume values without checking them for your specific case.

Frequently asked questions

How long does a site measurement visit take?

Most visits take between one and two hours depending on the number of openings and the complexity of the structure. Larger projects may require a longer visit or a second appointment.

Do I need to be present during the measurement?

It is strongly recommended. Having someone who knows the space and the project goals present helps us answer questions on the spot and avoids misunderstandings later.

Can I book a measurement before I have final plans?

Yes. A measurement visit is often the best first step, because the measured data helps your architect or designer prepare accurate plans for the steel frame.

What should I prepare before the visit?

Clear the area around the openings if possible, gather photos and any existing drawings, and note your access details and any building committee requirements.

Common mistakes to avoid

A common mistake is booking the visit with only a rough idea of the space and then approving a drawing without checking dimensions against the site. Measure twice, compare the drawing with the actual openings, and raise any doubts before production starts.

Our recommendation

Ask for the measurement to be taken at several points for each opening, especially on older buildings where walls are rarely perfectly straight. Keep the measurement notes and drawing together so the installation team works from the same information you approved.

Summary

Booking a steel frame site measurement is the first step to an accurate, well-fitting frame made at Techno Kol Uzi in Tel Aviv. Good preparation and careful approval of the drawing make installation smooth.

השאירו פרטים ונחזור אליכם