From Drawing to Cutting: How a Custom Iron Fence Is Designed

t306-7

A custom iron fence is designed in stages: an inquiry with photos, on-site measurement, a drawing and written specification, client approval, then production and finishing in the factory before installation. Each stage locks in dimensions and design choices so the fence fits the opening and the look you want the first time.

Starting with an inquiry and photos

The process begins when you send us an inquiry with photos of the area where the fence will stand. Clear images of the wall, the existing posts, the slope of the ground and the surrounding building help us understand the site before anyone visits.

It also helps to describe what you need: is the fence for privacy, safety, a pet, or purely decorative? Mention any style you like, such as a simple vertical bar pattern or a more ornate design. These notes guide the first sketches and keep the conversation focused on what matters to you.

On-site measurement

Next, one of our team visits the site to measure. We record the length of each run, the height at several points, the position of gates and posts, and any changes in ground level. Slopes are important because a fence that follows the terrain looks more natural and avoids awkward gaps.

Overall length and height of each section
Post positions and gate openings
Ground slope and wall or curb conditions

We also check the material of the base, since it affects how the posts are fixed.

Drawing and written specification

With the measurements in hand, we prepare a drawing that shows the layout, the pattern of bars or panels, the height and the gate arrangement. The drawing is accompanied by a written specification listing the materials, profiles, finishing method and installation details, so there is no guesswork later.

You are welcome to ask for changes at this stage. Adjusting bar spacing, adding a decorative top or moving a gate is far simpler on paper than after production has begun.

Client approval before production

Nothing goes into production until you have reviewed and approved the drawing and specification. We ask you to check the dimensions, the design and the finish, and to confirm that the layout matches your property and any requirements from a building committee or engineer.

Approval is the point where the design becomes fixed. Taking time here saves changes later and keeps the project on track.

Factory production and finishing

Once approved, the fence is cut, shaped and welded in our Tel Aviv factory at 37 Rival Street. Each panel is built to the measured dimensions, checked for alignment and then prepared for finishing. Depending on the design, finishing may include hot-dip galvanizing for corrosion protection and powder coating for color and durability.

Working in the factory allows careful quality control away from the weather and the site, so the fence arrives ready to fit.

Installation and final check

The last stage is installation. Posts are set and fixed according to the specification, then the panels or sections are mounted and aligned. We check levels, gate movement and fixings before we finish, and we point out anything you should know about maintaining the finish.

For railings and safety-related elements, exact values such as heights and spacing are verified with the engineer, and we follow the general requirements of the Israeli railing standard SI 1142.

Frequently asked questions

How long does a custom iron fence project take from the first inquiry?

The timing depends on the size of the project and the stage of approval, so we confirm the schedule once the drawing and specification are agreed. Clear feedback on the drawing helps keep the process moving.

Do I need to be present for the on-site measurement?

It is helpful but not always necessary. If you can show the team the boundaries, gates and any problem areas, the measurement will be more accurate.

Can I change the design after approving the drawing?

Changes after approval may affect production, so we recommend raising any concerns during the drawing stage. Minor adjustments are discussed with you before work continues.

Is the fence finished against rust?

Depending on the design, we use hot-dip galvanizing and powder coating to protect the iron. We explain the finish options in the specification so you know what to expect.

Common mistakes to avoid

Many clients approve a drawing without checking dimensions or ground conditions, which leads to changes later. Take time to review the measurements and layout before giving approval.

Our recommendation

Mark the planned fence line and gate positions on the ground before the measurement visit, and note any slopes or obstacles. This gives the team a clearer picture and speeds up the design.

Summary

A custom iron fence moves from photos and on-site measurement to a drawing, your approval, factory production and finishing, and finally installation. Each step keeps the fence accurate and matched to your property.

השאירו פרטים ונחזור אליכם