Glass Partition Repair Service: Maintenance Visit Guide

t432-42

A glass partition repair service starts with an on-site visit where we inspect the existing glass, frame, seals and fixings, then measure and recommend either a repair or a replacement. Once you approve a written specification, the parts are made in our Tel Aviv factory and installed on site.

Why a Proper Inspection Comes First

Glass partitions can look fine from a distance while hidden problems grow over time. Loose hinges, worn gaskets, bent aluminum profiles, cracked glass edges and failed sealant all affect safety and how the partition works. A careful inspection shows what is really wrong before any work is quoted or started.

During the visit we check each panel, its fixings and the surrounding wall or floor connection, and note anything that needs attention.

On-Site Measurement and Photos

Accurate measurement is the foundation of a good repair. Old partitions are rarely perfectly square, so we measure each opening and panel individually rather than relying on original drawings.

Overall width, height and depth of every panel
Frame profile type and condition
Glass thickness and any damage or tint
Position of hinges, handles and locks

Photos taken during the visit help us prepare the drawing before we return to the factory.

Planning the Repair or Replacement

Some partitions only need new seals, a rehung door or a new handle. Others need a fresh panel or a complete frame. We explain both options so you can decide based on the condition and your budget goals.

Where safety glass or fire-related requirements apply, we will tell you so the specification reflects them. For exact structural or safety values we check with the responsible engineer rather than guessing.

Written Specification and Your Approval

Before anything is produced, you receive a drawing and a written specification describing the materials, finish, glass type, hardware and the work included. Please read it carefully and ask questions about anything that is unclear.

Production starts only after you approve the specification, which prevents surprises about finish or fit later.

Production and Finishing in Our Factory

Parts are made to measure at our factory at 37 Rival Street in Tel Aviv. Aluminum and steel profiles are cut, assembled and finished, then glass is prepared to the measured sizes. Where the design calls for protection against weather, we use hot-dip galvanizing or powder coating on metal parts.

Working in the factory lets us check each element before it reaches your building, reducing the time spent on site.

Installation and Handover

On the installation day our team removes the old elements, fits the new parts and adjusts hinges, seals and alignment so doors close smoothly and panels sit level. We clean the glass and check the work together with you before leaving.

Confirm alignment and smooth operation
Check seals and fixings
Review care tips for the glass and hardware

Frequently asked questions

How long does a glass partition repair visit take?

Most inspection and measurement visits are completed in one visit, depending on how many partitions there are. We confirm the schedule when you send your inquiry with photos.

Do I need to be home during the visit?

Someone with authority over the building or unit should be available to let us in and confirm the work. We can coordinate this with your building committee or contractor if needed.

Can you repair a partition or do I have to replace it?

It depends on the condition of the frame, glass and hardware. After inspection we will recommend the option that makes the most sense and explain why.

Do you work with architects and contractors?

Yes, we work with private homeowners, building committees, contractors, architects and interior designers, and can follow their drawings or specifications.

Common mistakes to avoid

Waiting until a glass panel is cracked or a door no longer closes before calling. Small issues like worn seals or loose hinges are cheaper to fix early and can prevent damage to the glass.

Our recommendation

Send clear photos of each partition, including the frame, hinges and any damage, when you make your inquiry. This lets us prepare better for the visit and often shortens the time needed on site.

Summary

A glass partition repair service combines inspection, accurate measurement, a written specification, factory production and careful installation. Approving the plan before production keeps the result predictable.

השאירו פרטים ונחזור אליכם