Requesting a Custom Quote for Security Bars in Israel

t264-38

To request a security bar quote, send us photos and rough measurements of your windows or balconies, and we will arrange an on-site measurement and a written specification before production. Every set of bars is made to measure in our Tel Aviv factory and finished before installation.

What to Send When You Request a Quote

A good enquiry starts with clear photos. Take one photo of each opening from inside the room, standing a few steps back so the full frame, the wall around it, and any shutters or handles are visible. Add a second photo from outside if the window faces a balcony or a shared area.

Also note the approximate width and height of each opening, the material of the frame, and whether the bars should be fixed or removable for emergency egress. Mention the floor, the building type, and whether the bars will match an existing gate or railing.

Photos of each opening, inside and outside
Rough width and height in centimeters
Frame material: aluminum, PVC, wood, or steel
Preferred color or finish

On-Site Measurement Explained

After we review your photos, a technician visits the site to take exact measurements. This matters because walls are rarely perfectly square, and an opening that looks even can differ by a few millimeters from top to bottom. We measure each opening at several points and record the depth of the reveal where the bars will be fixed.

During the visit we also check the wall material, the condition of the frame, and the best fixing points. This is the step that prevents surprises on installation day.

Drawing and Written Specification

Once the measurements are confirmed, we prepare a drawing showing the bar layout, spacing, profile sizes, and the opening direction of any gate or hinged section. The written specification lists the materials, the finish, the fixing method, and any special features such as a quick-release panel.

Please read the drawing carefully before approving it. Check the bar spacing, the placement of any locks, and the finish color. Any change at this stage is far simpler than a change after production has started.

Client Approval and Production Steps

Your written approval confirms the drawing and specification, and only then does production begin. Each piece is cut, welded, and assembled in our factory on Rival Street. Iron and aluminum components are finished with hot-dip galvanizing or powder coating, depending on the material and the exposure of the site.

Finishing is done before delivery so that the bars arrive ready to fix. Our team checks each unit against the approved drawing before it leaves the workshop.

Installation and Final Check

Installation is carried out by our team at the agreed time. We fix the bars to the reveal or the frame using the method set out in the specification, and we check that each panel opens, closes, and locks as intended. Where a removable or emergency-release feature is included, we demonstrate it to the occupants.

Before we leave, we review the finished work with you, confirm that the fixings are secure, and answer any questions about care and maintenance.

Preparing Your Site for the Visit

Clear the area around the windows or balcony doors so the technician can reach each opening comfortably. Note any obstacles such as air conditioners, pipes, or tiles near the frame, since these affect where bars can be fixed.

Keep pets and children away from the working area
Have access to the balcony or room at the agreed time
Tell us about any shutters or blinds that must still operate

Frequently asked questions

Do I need exact measurements before I request a quote?

No. Rough measurements and clear photos are enough to start. We take the exact measurements on site before any drawing is prepared.

Can the bars be designed to open for emergency exit?

Yes. Removable or quick-release panels can be included in the specification. Please mention this in your enquiry so it is planned from the start.

How do I know the drawing is correct before production?

Review the layout, spacing, opening direction, and finish on the drawing. Your written approval is required before we begin manufacturing.

Can you match bars to an existing gate or railing?

In most cases yes. Send photos of the existing ironwork, and we will advise on profile size, color, and finish during the planning stage.

Common mistakes to avoid

Sending only a single blurry photo or skipping the reveal depth often leads to delays. Approving a drawing without checking the bar spacing and opening direction is another common error that is costly to correct later.

Our recommendation

Take photos from both inside and outside, and note any obstacles near the frame before the visit. Confirm the emergency-release requirement early so it is built into the specification rather than added later.

Summary

A clear enquiry with photos and rough sizes leads to an on-site measurement, a written drawing, your approval, factory production, and professional installation. Following this process keeps the result accurate and the timeline predictable.

השאירו פרטים ונחזור אליכם