Commercial Security Bars Projects for Offices and Shops

Step 1: Inquiry and Site Photos

Every commercial security bars project begins with a short inquiry. Send us photos of the storefront or office windows, the building entrance, and any balconies or back openings you want to protect. Note the business type, opening hours, and whether the bars need to allow emergency exit from inside.

Photos help us understand the structure, the wall material, and how the openings are arranged before we visit the site.

Step 2: On-Site Measurement

A technician visits the premises and measures each opening carefully. Accurate measurement is the foundation of a good commercial security bars project, because bars that are even a few millimeters off will not sit correctly in the frame.

• Width and height of each opening, at several points
• Frame depth and wall material
• Existing glass, sills, and display fixtures that affect fitting
• Location of cables, pipes, and alarm sensors

Step 3: Drawing and Written Specification

After measuring, we prepare a drawing showing the bar pattern, spacing, fixing points, and any hinged or removable sections. A written specification lists the material, profile size, finish, and fixing method, so you know exactly what will be produced.

Please review the drawing carefully. Ask about sightlines, shop signage, and access for deliveries. Changes are easier to make at this stage than after production begins.

Step 4: Client Approval

Work does not go into production until you approve the drawing and specification in writing. This protects both sides: you know what you are getting, and we avoid producing parts that do not match your plan.

If your building committee, landlord, or architect must approve the design, include them at this step and share the drawing with them directly.

Step 5: Factory Production and Finishing

Our factory at 37 Rival Street in Tel Aviv cuts, welds, and assembles the bars to the approved drawing. Iron and aluminum are both used in commercial security bars projects, depending on the look, load, and budget you prefer.

Finished pieces receive protective treatment such as hot-dip galvanizing or powder coating, which helps them resist weather and wear in busy commercial locations.

Step 6: Installation on Site

Our team installs the bars at your premises, fixing them securely to the wall or frame and checking that each section opens, closes, and locks as intended. Where local standards or building rules apply, we confirm the requirements with the responsible engineer before fixing.

After installation we walk through the operation with you, including any emergency release, so your staff know how to use the bars safely.

Frequently asked questions

How long does a commercial security bars project take?

The timeline depends on the number of openings and the production schedule at the time of your order. We confirm the expected timing with you after the drawing and approval stage.

Can security bars on a shop front allow emergency exit?

Yes, this is a key part of planning. Hinged or quick-release sections can be designed into the bars, and we confirm the arrangement with the responsible engineer.

Should I choose iron or aluminum for commercial bars?

Iron offers strong, traditional security, while aluminum is lighter and resists corrosion well. We recommend the option that suits your opening size, exposure, and appearance preferences.

Do I need to be present during measurement?

It helps to be present or have someone who knows the premises available. They can point out sensors, cables, and fixtures that affect the design.

Common mistakes to avoid

Ordering bars before measuring accurately, or skipping the written drawing approval, often leads to pieces that do not fit. Always confirm dimensions and details before production starts.

Our recommendation

Measure and photograph every opening, including depth and any fixtures near the frame, and review the drawing with your landlord or building committee before approving it. Clear planning at the start prevents costly changes later.

Summary

A commercial security bars project moves step by step from inquiry and measurement to drawing, approval, factory production, and installation, with you confirming each stage. Careful planning ensures the bars protect your shop or office and fit correctly.

Related guides

• Bulk Ordering Process for Multi-Unit Building Security Bars
• Arranging Delivery and Installation Appointment
• Custom Iron Security Bars for Your Apartment Windows
• Confirming Production Schedule for Your Security Bars
• Aluminum Window Security Bars: Lightweight Protection Explained
• Reviewing Your Custom Security Bar Design Proposal
• All models in this category