Upgrade to Double Glazed Aluminum Windows in Tel Aviv

t405-1

Upgrading to double glazed aluminum windows replaces your single pane with two glass layers and a sealed air or gas gap, which reduces heat transfer and outside noise. Aluminum frames are durable, slim and can be made to measure for existing openings. A proper measurement and installation makes the biggest difference to comfort.

Why single glazing loses comfort

A single pane of glass lets heat escape in winter and enter in summer, and it passes a lot of street noise straight into your living room. Many older apartments in Tel Aviv still have this type of window, so residents often notice cold drafts near the glass, condensation on cold mornings, and traffic sounds at night.

Replacing only the glass is sometimes possible, but the frame often limits the result. Upgrading the whole window gives a better seal and a more consistent improvement across the opening.

What double glazing changes

Double glazing uses two panes separated by a sealed spacer, with an air or gas layer between them. That gap acts as an insulating barrier. Combined with a good frame and gaskets, it reduces heat loss and noticeably softens outside sound.

Steadier room temperature
Less condensation on the glass
Quieter rooms, especially facing a busy street

Why aluminum frames suit upgrades

Aluminum is strong, light and holds precise profiles, which makes it a good match for double glazing. Thermally broken aluminum profiles help limit heat passing through the frame itself. Powder coating gives a wide range of colors and a low-maintenance finish that stays good looking for years.

Because aluminum can be cut and assembled to your exact opening, it works well for both new and existing building openings.

How the upgrade process works

The process starts with an inquiry where you share photos of the existing windows. Next, our team measures on site, checking the opening, the wall condition and how the current frame is fixed. We then prepare a drawing and a written specification so you can review the design, glass type and opening style before anything is produced.

After your approval, the windows are manufactured in our factory at Rival Street 37, finished, and installed. Each step is confirmed with you before moving on.

Choosing the right glass and details

Not every double-glazed unit performs the same. Ask about the glass type, the spacer and the gas fill, and whether laminated glass is worth considering for the noisiest rooms. Good gaskets and a careful installation matter as much as the glass itself.

Opening style also affects comfort. Sliding and tilt-and-turn designs seal differently, so choose based on how you use each room and how much airflow you want.

Planning your upgrade

Start by listing which rooms feel coldest or loudest, since you may not need to upgrade every window at once. Note any safety requirements, such as balcony or low window heights, where railings or protective bars may also be needed. Check with your building committee if the windows face shared areas, as façade rules can apply.

A written quote based on accurate measurements helps you compare options fairly and avoids surprises during installation.

Frequently asked questions

Will double-glazed aluminum windows fix all noise problems?

They reduce a large part of outside noise, but very loud sources may still be audible. Glass choice, frame sealing and the room layout all affect the final result.

Can I upgrade only some windows in my apartment?

Yes, many residents start with the rooms that feel coldest or are most exposed to street noise. You can upgrade the rest later.

Do aluminum windows need much maintenance?

Powder-coated aluminum needs only gentle cleaning and periodic checks of seals and hardware. It is a low-maintenance choice for most homes.

How do I know if my opening suits new windows?

A site measurement by our team confirms the opening size, wall condition and fixing method. This is the best way to know what is possible.

Common mistakes to avoid

Choosing windows based only on the glass without considering the frame, seals and installation quality. Skipping accurate on-site measurement can also lead to poor fit and reduced performance.

Our recommendation

Measure and review the drawing carefully before approving, and ask for the glass and frame details in writing. Start with the rooms that matter most to your comfort.

Summary

Upgrading to double-glazed aluminum windows improves insulation and reduces noise when the glass, frame and installation are all done well.

השאירו פרטים ונחזור אליכם